15M BT Phone/Broadband Wall Socket Extension Cable Kit - 4 Way Reel Wire Lead
- Product Code: 1650/15m
- In Stock. FREE Delivery on all UK orders
15m BT Socket Extension Kit
Can be cut to the length required during installation.
One end of the BT wire should be attached to your current Master Socket (linebox) or another extension socket using the supplied IDC tool, the cable should then be clipped into place and run to the location where you would like your new BT extension socket. The wire should then be cut to length and connected to the new BT extension socket.
Further Information - On the newer NTE5A mastrer sockets there is a removable front panel where there are 3 IDC terminals and a cable can be attached using an IDC tool. The extension socket should be wired to the master socket in the following format; terminal 2 to 2, 3 to 3 and 5 to 5. If you have an older master socket (that doesn't have a removeable front panel), the wiring is still the same however a BT 431A connector should be crimped onto the extension cable and this should be plugged into the front of your master socket. If you still need to use your master socket locally, you will need to purchase a BT splitter adapter.