100M CAT6A Copper Network Cable Reel Box -10GBASE-T Ethernet - Drum LAN UTP RJ45

100M CAT6A Copper Network Cable Reel Box -10GBASE-T Ethernet - Drum LAN UTP RJ45

100M CAT6A Copper Network Cable Reel Box -10GBASE-T Ethernet - Drum LAN UTP RJ45

  • Product Code: 1367x100
  • In Stock. FREE Delivery on all UK orders
  • £89.99


spec

100 Metre Category 6A UTP Grey Cable - Pure Copper - 10GBASE-T

Uses - This cable is commonly used for networking and AV installations. The CAT6A specification means the cable will be suitable for 10 gigabit network connectivity at up to 100 metres. The cable

can be cut to length and fitted with RJ45 connectors, we recommend connectors that are specified as CAT6 or CAT6A. If you plan to fit these yourself, you will also need a RJ45 crimping tool, which we also supply. We would recommend using CAT6 or CAT6A connectors.

Made From - Pure copper conductors, this cable has been tested and is certified to CAT6A specification.

Ease of use - To make measuring easy the cable is marked at 1 metre intervals.


Technical Features;

No. of Cores: 8
Quality CAT6A 4 pair network cable
External Diameter: 6.5mm
Copper Conductor: 0.57mm Diameter ±0.01mm

(23AWG)
Unshielded Twisted Pair (UTP)
Conductor resistance:
70 Ohm/KM
Insulation resistance: 5000M Ohm/KM
Testing voltage: wire/wire 50Hz 1Min = 1.5KV
Suitable for up to 10Gbps @ 100m/330ft if used for networking purposes.


Wiring 
– Depending on the application in which you hope to use it, the cable can be wired in both the ‘straight through’ or ‘cross-over’ configurations.

'Cross over' cables are usually used for connecting 2 computers directly to one another, without the use of a Hub or Router. They use 568-A wiring at one end, and 568-B at the other.
'Straight through' cables can be used for connecting a PC or games console to a network switch/Router, or, in conjunction with AV extender devices, for audio and video distribution throughout a home or commercial project. To create a 'straight through' cable, it should be wired using the same wiring variant at both ends. Either ‘568-A to 568-A’ or ‘568-B to 568-B’

Variants

 – The 2 wiring configurations for CAT5 cable. TIA/EIA-568-A & TIA/EIA-568-B. have no technical differences between them. However, they connect the wires to the connector in a different order, as shown in the wiring diagram above.

 

If this all seems a litle too technical for you, then why not get in touch with us...

We’re always happy to help and offer advice. 

You might also be interested in our;

RJ45 CAT6 Connectors
RJ45 Crimp Tool
IDC Punch Down Tool

Search through our shop to find them.


Write a review

Please login or register to write a review

International Shipping Available

Please Click Here For Details

ThatCable Google Reviews