3 in 1 Coaxial Compression Crimp Kit Tool & 40x Connectors F Type RCA BNC Male
BUY ANY 3 ITEMS & GET 5% OFF. ENTER "BUY3" AT CHECKOUT.
Ultimate Compression Crimp Kit – 1x Tool & 40x Connectors.
Kit Contents:
1x 3-in-1 Compression Crimp Tool
10x RG59 F-Connector Compression Crimp Connectors (male)
10x RG6 F-Connector Compression Crimp Connectors (male)
10x RG59 BNC Compression Crimp Connectors (male)
10x RG6 RCA Compression Crimp Connectors (male)
Used for - This is an essential kit for anyone needing to crimp or fit F-Type, BNC and/or RCA compression connectors to RG59 or RG6 coaxial cable. This compression crimp tool is supplied with 3 interchangeable adapters that allow to crimp the 3 different types of connectors mentioned above.
Useful Features (tool) – Our high quality, professional crimp tool is extremely easy to use, a comfortable hand grip has also been installed to avoid causing any discomfort after extended use. There is a handy locking mechanism that keeps everything compact and safe when the crimpers are in your toolbox. The crimp tool is waterproof allowing it to be used in a number of different environments without subjugating it to stress or damage. The interchangeable adapters can also be stored within the tool when they are not use so you won’t lose them.
Useful Features (Connectors) – The great thing about compression connectors is you do not need to solder. The crimp tool will cause the connector to clamp onto the inserted cable very securely. The connectors have been precision manufactured & built with very high quality components.
Directions – The following steps can be followed for all connection types (F-Type, BNC & RCA):
You will need to strip the PVC outer layer without damaging the core inside, you can do this with one of our cable strippers but if you are confident with a pair of snips/pliers, you can strip the outer layer away with either of those.
Having removed enough insulation, you will see the silver/copper coloured wire net/braid around the internal insulation. Fold this braiding back over the outer PVC layer and then remove any foil shielding.
The following instructions should only be followed for F-Type Connectors (instructions for other connectors found below)
You can now insert an F-Connector over the top of the prepared cable so that the internal insulation is flush with the hole in the connector, insert the cable into the crimp tool and close all the way. Now trim any excess copper away from the top of the connector so it protrudes around 2-3mm. Your F-Connector is now securely crimped in place.
The following instructions should only be followed for BNC & RCA Connectors (instructions for other connectors found below)
You can now insert a BNC or RCA connector onto the prepared cable (be sure to put the relevant adapter into the tool). Be careful to ensure that the internal plastic ring of the connector goes under the outer PVC layer of your cable. Once this is pushed in, insert the cable and connector into the tool and close the handle all of the way (DO NOT GO ALL THE WAY WITH BNC CONNECTORS), you have now successfully compression crimped onto your cable.
Compression Distances:
F-Connector Distance – 20.3 +/- 0.20mm
BNC Distance – 33.9 +/- 0.20mm
RCA Distance – 31.6 +/- 0.20mm
RG59 F-Connector Specifications:
Recommended Cable - RG59 Coaxial - (6.1mm outer diameter, +/-0.2mm)
Dimensions - 21mm x 11mmØ
RG6 F-Connector Specifications:
Recommended Cable – RG6 Coaxial - (7.0mm outer diameter, +/-0.4mm)
Dimensions - 21mm x 11mmØ
RG59 BNC Specifications:
Recommended Cable - RG59 Coaxial - (6.1mm outer diameter, +/-0.2mm)
Dimensions - 39mm Uncompressed, 34mm Compressed
RG6 RCA Specifications:
Recommended Cable – RG6 Coaxial - (7.0mm outer diameter, +/-0.4mm)
Dimensions – 44.5mm (uncompressed) – 40mm (compressed)