Scart RF Modulator

Perfect solution for older TVs with no scart input.

Converts any scart device to into an aerial output!

What does it do?

Simply put, our ‘Scart to RF’ modulator allows the user to connect 1 device with a scart output such as a DVD player or freeview box and show what it is playing on a TV with an aerial socket. Therefore, it is a perfect solution for older TVs with no scart input.

It can also be used for distribution across an aerial network. For example, if the RF output of this scart modulator was implemented before the signal was split (in a loft), all TVs on the network would have access to the scart device via the aerial sockets.

Specification

How to use – The aerial cable from your wall should be plugged into the modulator. Another aerial cable should be then run from the modulator to the TV. The scart device should be plugged into the modulator. An additional aerial cable can be purchased from our shop if required.

Pass Through - This means all RF frequencies already running along your aerial cable (from your aerial) will be able to pass through the modulator without being stopped, meaning you won’t constantly have to unplug the modulator after use.

General Specification;

1 x Scart Input RF input and output with pass through. Output channel 36 on TV PAL-B/G/I (works with all UK TVs) Colour – Black Retail packaged with instructions

Build Quality – The unit is well built and compact.

Nickel Plated Connectors – for an excellent signal quality

Advanced PCB – The PCB (printed circuit board) has been designed to add a high quality additional frequency for an ultimate quality picture through your aerial. There is also a 1K/75 ohm switch to ensure the picture you are getting is as good as possible.